Loading prompt...

solidity-security | Evokore

🤖system prompt•7 months ago

solidity-security

Master smart contract security best practices to prevent common

security

Quality

👁️0 views

🤖 Auto-discovered

>Payload Data

Editable Format

# Solidity Security

Master smart contract security best practices, vulnerability prevention, and secure Solidity development patterns.

## When to Use This Skill

- Writing secure smart contracts
- Auditing existing contracts for vulnerabilities
- Implementing secure DeFi protocols
- Preventing reentrancy, overflow, and access control issues
- Optimizing gas usage while maintaining security
- Preparing contracts for professional audits
- Understanding common attack vectors

## Critical Vulnerabilities

### 1. Reentrancy

Attacker calls back into your contract before state is updated.

**Vulnerable Code:**

```solidity
// VULNERABLE TO REENTRANCY
contract VulnerableBank {
    mapping(address => uint256) public balances;

function withdraw() public {
        uint256 amount = balances[msg.sender];

// DANGER: External call before state update
        (bool success, ) = msg.sender.call{value: amount}("");
        require(success);

balances[msg.sender] = 0;  // Too late!
    }
}
```

**Secure Pattern (Checks-Effects-Interactions):**

```solidity
contract SecureBank {
    mapping(address => uint256) public balances;

function withdraw() public {
        uint256 amount = balances[msg.sender];
        require(amount > 0, "Insufficient balance");

// EFFECTS: Update state BEFORE external call
        balances[msg.sender] = 0;

// INTERACTIONS: External call last
        (bool success, ) = msg.sender.call{value: amount}("");
        require(success, "Transfer failed");
    }
}
```

**Alternative: ReentrancyGuard**

```solidity
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";

contract SecureBank is ReentrancyGuard {
    mapping(address => uint256) public balances;

function withdraw() public nonReentrant {
        uint256 amount = balances[msg.sender];
        require(amount > 0, "Insufficient balance");

balances[msg.sender] = 0;

(bool success, ) = msg.sender.call{value: amount}("");
        require(success, "Transfer failed");
    }
}
```

### 2. Integer Overflow/Underflow

**Vulnerable Code (Solidity < 0.8.0):**

```solidity
// VULNERABLE
contract VulnerableToken {
    mapping(address => uint256) public balances;

function transfer(address to, uint256 amount) public {
        // No overflow check - can wrap around
        balances[msg.sender] -= amount;  // Can underflow!
        balances[to] += amount;          // Can overflow!
    }
}
```

**Secure Pattern (Solidity >= 0.8.0):**

```solidity
// Solidity 0.8+ has built-in overflow/underflow checks
contract SecureToken {
    mapping(address => uint256) public balances;

function transfer(address to, uint256 amount) public {
        // Automatically reverts on overflow/underflow
        balances[msg.sender] -= amount;
        balances[to] += amount;
    }
}
```

**For Solidity < 0.8.0, use SafeMath:**

```solidity
import "@openzeppelin/contracts/utils/math/SafeMath.sol";

contract SecureToken {
    using SafeMath for uint256;
    mapping(address => uint256) public balances;

function transfer(address to, uint256 amount) public {
        balances[msg.sender] = balances[msg.sender].sub(amount);
        balances[to] = balances[to].add(amount);
    }
}
```

### 3. Access Control

**Vulnerable Code:**

```solidity
// VULNERABLE: Anyone can call critical functions
contract VulnerableContract {
    address public owner;

function withdraw(uint256 amount) public {
        // No access control!
        payable(msg.sender).transfer(amount);
    }
}
```

**Secure Pattern:**

```solidity
import "@openzeppelin/contracts/access/Ownable.sol";

contract SecureContract is Ownable {
    function withdraw(uint256 amount) public onlyOwner {
        payable(owner()).transfer(amount);
    }
}

// Or implement custom role-based access
contract RoleBasedContract {
    mapping(address => bool) public admins;

modifier onlyAdmin() {
        require(admins[msg.sender], "Not an admin");
        _;
    }

function criticalFunction() public onlyAdmin {
        // Protected function
    }
}
```

### 4. Front-Running

**Vulnerable:**

```solidity
// VULNERABLE TO FRONT-RUNNING
contract VulnerableDEX {
    function swap(uint256 amount, uint256 minOutput) public {
        // Attacker sees this in mempool and front-runs
        uint256 output = calculateOutput(amount);
        require(output >= minOutput, "Slippage too high");
        // Perform swap
    }
}
```

**Mitigation:**

```solidity
contract SecureDEX {
    mapping(bytes32 => bool) public usedCommitments;

// Step 1: Commit to trade
    function commitTrade(bytes32 commitment) public {
        usedCommitments[commitment] = true;
    }

// Step 2: Reveal trade (next block)
    function revealTrade(
        uint256 amount,
        uint256 minOutput,
        bytes32 secret
    ) public {
        bytes32 commitment = keccak256(abi.encodePacked(
            msg.sender, amount, minOutput, secret
        ));
        require(usedCommitments[commitment], "Invalid commitment");
        // Perform swap
    }
}
```

## Security Best Practices

### Checks-Effects-Interactions Pattern

```solidity
contract SecurePattern {
    mapping(address => uint256) public balances;

function withdraw(uint256 amount) public {
        // 1. CHECKS: Validate conditions
        require(amount <= balances[msg.sender], "Insufficient balance");
        require(amount > 0, "Amount must be positive");

// 2. EFFECTS: Update state
        balances[msg.sender] -= amount;

// 3. INTERACTIONS: External calls last
        (bool success, ) = msg.sender.call{value: amount}("");
        require(success, "Transfer failed");
    }
}
```

### Pull Over Push Pattern

```solidity
// Prefer this (pull)
contract SecurePayment {
    mapping(address => uint256) public pendingWithdrawals;

function recordPayment(address recipient, uint256 amount) internal {
        pendingWithdrawals[recipient] += amount;
    }

function withdraw() public {
        uint256 amount = pendingWithdrawals[msg.sender];
        require(amount > 0, "Nothing to withdraw");

pendingWithdrawals[msg.sender] = 0;
        payable(msg.sender).transfer(amount);
    }
}

// Over this (push)
contract RiskyPayment {
    function distributePayments(address[] memory recipients, uint256[] memory amounts) public {
        for (uint i = 0; i < recipients.length; i++) {
            // If any transfer fails, entire batch fails
            payable(recipients[i]).transfer(amounts[i]);
        }
    }
}
```

### Input Validation

```solidity
contract SecureContract {
    function transfer(address to, uint256 amount) public {
        // Validate inputs
        require(to != address(0), "Invalid recipient");
        require(to != address(this), "Cannot send to contract");
        require(amount > 0, "Amount must be positive");
        require(amount <= balances[msg.sender], "Insufficient balance");

// Proceed with transfer
        balances[msg.sender] -= amount;
        balances[to] += amount;
    }
}
```

### Emergency Stop (Circuit Breaker)

```solidity
import "@openzeppelin/contracts/security/Pausable.sol";

contract EmergencyStop is Pausable, Ownable {
    function criticalFunction() public whenNotPaused {
        // Function logic
    }

function emergencyStop() public onlyOwner {
        _pause();
    }

function resume() public onlyOwner {
        _unpause();
    }
}
```

## Gas Optimization

### Use `uint256` Instead of Smaller Types

```solidity
// More gas efficient
contract GasEfficient {
    uint256 public value;  // Optimal

function set(uint256 _value) public {
        value = _value;
    }
}

// Less efficient
contract GasInefficient {
    uint8 public value;  // Still uses 256-bit slot

function set(uint8 _value) public {
        value = _value;  // Extra gas for type conversion
    }
}
```

### Pack Storage Variables

```solidity
// Gas efficient (3 variables in 1 slot)
contract PackedStorage {
    uint128 public a;  // Slot 0
    uint64 public b;   // Slot 0
    uint64 public c;   // Slot 0
    uint256 public d;  // Slot 1
}

// Gas inefficient (each variable in separate slot)
contract UnpackedStorage {
    uint256 public a;  // Slot 0
    uint256 public b;  // Slot 1
    uint256 public c;  // Slot 2
    uint256 public d;  // Slot 3
}
```

### Use `calldata` Instead of `memory` for Function Arguments

```solidity
contract GasOptimized {
    // More gas efficient
    function processData(uint256[] calldata data) public pure returns (uint256) {
        return data[0];
    }

// Less efficient
    function processDataMemory(uint256[] memory data) public pure returns (uint256) {
        return data[0];
    }
}
```

### Use Events for Data Storage (When Appropriate)

```solidity
contract EventStorage {
    // Emitting events is cheaper than storage
    event DataStored(address indexed user, uint256 indexed id, bytes data);

function storeData(uint256 id, bytes calldata data) public {
        emit DataStored(msg.sender, id, data);
        // Don't store in contract storage unless needed
    }
}
```

## Common Vulnerabilities Checklist

```solidity
// Security Checklist Contract
contract SecurityChecklist {
    /**
     * [ ] Reentrancy protection (ReentrancyGuard or CEI pattern)
     * [ ] Integer overflow/underflow (Solidity 0.8+ or SafeMath)
     * [ ] Access control (Ownable, roles, modifiers)
     * [ ] Input validation (require statements)
     * [ ] Front-running mitigation (commit-reveal if applicable)
     * [ ] Gas optimization (packed storage, calldata)
     * [ ] Emergency stop mechanism (Pausable)
     * [ ] Pull over push pattern for payments
     * [ ] No delegatecall to untrusted contracts
     * [ ] No tx.origin for authentication (use msg.sender)
     * [ ] Proper event emission
     * [ ] External calls at end of function
     * [ ] Check return values of external calls
     * [ ] No hardcoded addresses
     * [ ] Upgrade mechanism (if proxy pattern)
     */
}
```

## Testing for Security

```javascript
// Hardhat test example
const { expect } = require("chai");
const { ethers } = require("hardhat");

describe("Security Tests", function () {
  it("Should prevent reentrancy attack", async function () {
    const [attacker] = await ethers.getSigners();

const VictimBank = await ethers.getContractFactory("SecureBank");
    const bank = await VictimBank.deploy();

const Attacker = await ethers.getContractFactory("ReentrancyAttacker");
    const attackerContract = await Attacker.deploy(bank.address);

// Deposit funds
    await bank.deposit({ value: ethers.utils.parseEther("10") });

// Attempt reentrancy attack
    await expect(
      attackerContract.attack({ value: ethers.utils.parseEther("1") }),
    ).to.be.revertedWith("ReentrancyGuard: reentrant call");
  });

it("Should prevent integer overflow", async function () {
    const Token = await ethers.getContractFactory("SecureToken");
    const token = await Token.deploy();

// Attempt overflow
    await expect(token.transfer(attacker.address, ethers.constants.MaxUint256))
      .to.be.reverted;
  });

it("Should enforce access control", async function () {
    const [owner, attacker] = await ethers.getSigners();

const Contract = await ethers.getContractFactory("SecureContract");
    const contract = await Contract.deploy();

// Attempt unauthorized withdrawal
    await expect(contract.connect(attacker).withdraw(100)).to.be.revertedWith(
      "Ownable: caller is not the owner",
    );
  });
});
```

## Audit Preparation

```solidity
contract WellDocumentedContract {
    /**
     * @title Well Documented Contract
     * @dev Example of proper documentation for audits
     * @notice This contract handles user deposits and withdrawals
     */

/// @notice Mapping of user balances
    mapping(address => uint256) public balances;

/**
     * @dev Deposits ETH into the contract
     * @notice Anyone can deposit funds
     */
    function deposit() public payable {
        require(msg.value > 0, "Must send ETH");
        balances[msg.sender] += msg.value;
    }

/**
     * @dev Withdraws user's balance
     * @notice Follows CEI pattern to prevent reentrancy
     * @param amount Amount to withdraw in wei
     */
    function withdraw(uint256 amount) public {
        // CHECKS
        require(amount <= balances[msg.sender], "Insufficient balance");

// EFFECTS
        balances[msg.sender] -= amount;

// INTERACTIONS
        (bool success, ) = msg.sender.call{value: amount}("");
        require(success, "Transfer failed");
    }
}
```

## Resources

- **references/reentrancy.md**: Comprehensive reentrancy prevention
- **references/access-control.md**: Role-based access patterns
- **references/overflow-underflow.md**: SafeMath and integer safety
- **references/gas-optimization.md**: Gas saving techniques
- **references/vulnerability-patterns.md**: Common vulnerability catalog
- **assets/solidity-contracts-templates.sol**: Secure contract templates
- **assets/security-checklist.md**: Pre-audit checklist
- **scripts/analyze-contract.sh**: Static analysis tools

## Tools for Security Analysis

- **Slither**: Static analysis tool
- **Mythril**: Security analysis tool
- **Echidna**: Fuzzing tool
- **Manticore**: Symbolic execution
- **Securify**: Automated security scanner

## Common Pitfalls

1. **Using `tx.origin` for Authentication**: Use `msg.sender` instead
2. **Unchecked External Calls**: Always check return values
3. **Delegatecall to Untrusted Contracts**: Can hijack your contract
4. **Floating Pragma**: Pin to specific Solidity version
5. **Missing Events**: Emit events for state changes
6. **Excessive Gas in Loops**: Can hit block gas limit
7. **No Upgrade Path**: Consider proxy patterns if upgrades needed

solidity-security

>Payload Data

SIMILAR_PROMPTS